Track systems
For vehicles from 80 to 180 hp
- Since 2014servicing and developing rubber track systems
- 80–180 hpfor vehicles in this power range
- 4 trackseach adapting to the ground
- Europerobust quality, made in Europe
Products
Track systems, trail groomers, ice millers and snow blades for tractors and municipal vehicles.
Track systems
For vehicles from 80 to 180 hp, with a dedicated carrier axle instead of wheel-hub mounting.
Learn more →Trail groomers
Müller trail tillers with track-setting plates, 160 to 320 cm wide, for tractors up to 280 hp.
Learn more →Ice millers
Müller EF ice millers with carbide teeth, 100 to 240 cm wide, for tractors and municipal vehicles.
Learn more →Snow blades
Müller RS 8-way or 12-way blades, 150 to 400 cm wide.
Learn more →Why MTrack?
MTrack’s staff and engineers have been servicing and developing rubber track systems since 2014. Thanks to their long experience, the track systems have been continuously improved and adapted to customer requirements. The tracks are developed in the snow-covered Austrian Alps, in the heart of Europe.
So that a tracked vehicle can be used without restriction on snow, mud and loose ground, MTrack does not use wheel-hub based systems but develops a dedicated carrier axle for every vehicle.
Thanks to this design, all four tracks adapt perfectly to the ground, which prevents the track system from tipping over and protects the wheel hub of the carrier vehicle.
Independently tested
Less pressure on the soil
On 19 September 2025, the Bern University of Applied Sciences (HAFL) measured on a vegetable field at Swissradies in Kerzers how much pressure different tractors put on the soil. Among them: a Deutz-Fahr 6150.4 with MTrack tracks (300 mm).
Source: Bern University of Applied Sciences HAFL, soil pressure measurements Kerzers, 19.09.2025 (measuring point 2, Bolling probes). The guideline for topsoil is 1 bar. Full report in German (PDF, 4 MB) (opens in a new window)
- Below the guideline: Despite an empty weight of over 8.5 t, the Deutz-Fahr 6150.4 with MTrack stays below 1 bar in the topsoil, even with a mounted rotary tiller.
- Half the pressure with a tiller: 0.75 bar with MTrack tracks compared with 1.6 bar for the reference tractor on row-crop tyres.
- Protection for the subsoil: Thanks to the tracks, the guideline of 0.5 bar at 40 cm depth is not exceeded either, despite the higher rear-axle load (measured in the wheel track).
- Stable under draught: With 35 kN of pulling force, the MTrack tracks hardly tend to rear up.
The GBL 300 track system was measured on a Deutz-Fahr 6150.4. Values may differ for other systems, vehicles and soils.
Applications
-
Snow
Fully usable on snow.
-
Trails & ice
Trail groomers and ice millers.
-
Mud
Also on mud and loose ground.
-
Grassland & terrain
Unbeatable on grassland and rough terrain.
In action
Mowing, grooming trails, clearing snow: MTrack at work.
References
Customers all over Switzerland rely on MTrack Swiss, from agriculture to winter services.
-
Kerzers FR · Vegetable farming
Swissradies
Deutz-Fahr 6150.4 with MTrack track system
[TEXT FOLGT: Kundenstimme]
-
Lenzerheide GR · Trail grooming
[TEXT FOLGT: Kunde]
Lindner Lintrac with MTrack and trail groomer
[TEXT FOLGT: Kundenstimme]
-
Wildhaus SG · Trail grooming
[TEXT FOLGT: Kunde]
Lindner with MTrack and trail groomer
[TEXT FOLGT: Kundenstimme]
-
Melchsee-Frutt OW · Trail grooming
[TEXT FOLGT: Kunde]
Lindner Lintrac with MTrack and Müller trail tiller
[TEXT FOLGT: Kundenstimme]
-
Adelboden BE · Winter service
[TEXT FOLGT: Kunde]
EF240 ice miller for car parks
[TEXT FOLGT: Kundenstimme]
-
Flims GR · Winter service
[TEXT FOLGT: Kunde]
EF160 ice miller on a Liebherr L507 wheel loader
[TEXT FOLGT: Kundenstimme]
-
Rigi · Winter service
[TEXT FOLGT: Kunde]
Electric Rigitrac SKE 40 with Müller ice miller
[TEXT FOLGT: Kundenstimme]
Robust quality,
made in Europe.