Products

Track systems, trail groomers, ice millers and snow blades for tractors and municipal vehicles.

Track systems

For vehicles from 80 to 180 hp.

  • No wheel-hub based systems: a dedicated carrier axle is developed for every vehicle.
  • All four tracks adapt to the ground.
  • Prevents the track system from tipping over and protects the wheel hub of the carrier vehicle.
  • Fully usable on snow, mud and loose ground.
  • Serviced and developed further since 2014, developed in the Austrian Alps, made in Europe.
  • Road-approved and with the vehicle manufacturer’s operating permit: we coordinate every system directly with the tractor manufacturers.
  • Year-round use: on snow in winter, on grassland, arable land, moorland and in orchards in summer.

Standard and special versions: The standard product is the wide track for winter services, trails and grassland. There are also special versions, e.g. extra narrow vegetable tracks (Deutz-Fahr 6150.4 at Swissradies in Kerzers), tracks for orchard and narrow-gauge tractors such as the Deutz-Fahr 5 DS in an orchard, and one-off projects up to a combine harvester in special crops.

In use on tractors from Lindner, Deutz-Fahr, John Deere, Fendt and Steyr, among others, see gallery. We have also demonstrated MTrack with an Aebi TT on the Preda–Bergün sledge run, the longest sledge run in Switzerland.

MTrack Swiss is the official representative of MTrack (opens in a new window) (MT Produktions GmbH, Nenzing, Austria) in Switzerland. Advice, sales and fitting from a single source.

Independently tested: soil pressure measurement by the Bern University of Applied Sciences HAFL, see the results.

Enquire about this product
Models and example vehicles
ModelTrack widthFits e.g.
GBL 30012″ (approx. 300 mm)John Deere 6120M / 6140M, Fendt 516, New Holland T5.140 / T6.160, Case Vestrum / Maxxum, Steyr Expert / Profi, Deutz-Fahr 6150.4
GBL 380L15″Holder C, Multihog CX55, Sauerburger GRIP4-70, Aebi TT241
GBL 380S15″ / 17″Holder S, Multihog MX120, Aebi TT241 / TT281
GBL 432V17″Fendt 200V, Deutz-Fahr 5 DS TTV
GBL 46018″Massey Ferguson 5711M, Valtra A115, Fendt 211, Schiltrac, Lindner Lintrac 100, Rigitrac 75
GBL 63518″ / 25″Massey Ferguson 5S.145, John Deere 6120M / 6140M, Valtra G135, Fendt 516, New Holland T5.140 / T6.160, Case Vestrum / Maxxum, Steyr Expert / Profi, Deutz-Fahr 6150.4

All systems include vehicle-specific carrier axles. Your vehicle is not listed? We will gladly check which system fits. Prices on request.

Trail groomers

Groom cross-country trails, winter hiking paths and sledge runs with your own tractor.

A trail groomer is essentially a wider tiller with its own milling shaft, finishers and track-setting plates. The Müller LF trail tiller loosens the snow, the Nordic finishers (22 mm) smooth the skating lane, and hydraulically lowered track plates set the classic track at 30 or 40 mm depth. Hydraulically folding SF side wings make the trail 60 cm wider and leave clean edges.

Together with MTrack tracks and the RS12 12-way blade, this becomes the LS trail groomer: a tractor with the capabilities of a snow groomer, e.g. on a Lindner Lintrac 100, Fendt 211 or Massey Ferguson.

  • Working widths from 220 to 380 cm, for tractors up to 280 hp
  • Year-round use of the carrier vehicle, road approval possible with wheels and tracks
  • Works even with little snow, gentle on the ground
  • Low investment, maintenance and running costs compared with a snow groomer
  • Optional ISOBUS control: operate side wings, track plates and contact pressure directly from the tractor display

New: Fendt 211 Profi as a road-approved trail groomer on MTrack tracks, in use in Rohrmoos.

In use on a Lindner Lintrac with MTrack tracks in Lenzerheide, on the Melchsee-Frutt and in Wildhaus.

MTrack Swiss is the official partner and distributor of Müller (opens in a new window) in Switzerland.

Enquire about this product
Müller LF trail tillers
VersionShaft widthsFeatures
LF160, 180, 200, 240, 280, 320 cmProven standard tiller, driven by PTO (540/1000 rpm) or hydraulic motor
LF PRO200, 220, 240, 280 cmMore aggressive shaft for ice, larger housing for lots of fresh snow, three movable pressure bars for a better finish
LF GOLD200, 220, 240, 280 cmShaft with carbide teeth, virtually wear-free, ideal for hard-frozen artificial-snow trails and cambered forest roads

Accessories: SP30 / SP40 track plates, SF side wings, SB swivel frame for clean tracks in bends, ISOBUS control. We will gladly help you find the right width for your vehicle. Prices on request. Müller trail grooming brochure in German (PDF, 5 MB) (opens in a new window)

Ice millers

Safe paths and car parks without grit.

The Müller EF ice miller breaks up compacted snow and ice on hiking paths, sledge runs, car parks and storage areas. The carbide-tipped teeth hardly wear, and a replaceable Hardox wear plate protects the housing.

  • For tractors and municipal vehicles up to 200 hp
  • Models EF100, EF120, EF160, EF180, EF200 and EF240 (the number is the shaft width in cm)
  • Driven by PTO (540/1000 rpm) or hydraulic motor
  • Front or rear mounting, also as a trailed version
  • No gravel or salt needed, road travel possible

In use as an EF240 on a car park in Adelboden, as an EF160 on a Liebherr L507 wheel loader in Flims and on an electric Rigitrac SKE 40 on the Rigi, among others.

MTrack Swiss is the official partner and distributor of Müller (opens in a new window) in Switzerland.

Enquire about this product

Snow blades

Müller RS 8-way and 12-way blades.

The RS blade moves large amounts of fresh snow, spreads artificial-snow depots and evens out cross ruts on sledge runs. Combined with the MTrack track system, it clears snow even where wheeled vehicles get stuck.

  • Easy to attach to and remove from almost any tractor
  • Ideal for sloping trails, winter hiking paths and sledge runs
  • RS8 for front linkage, A-frame or skid-steer plate, RS12 for front linkage

MTrack Swiss is the official partner and distributor of Müller (opens in a new window) in Switzerland.

Enquire about this product
Müller RS blades
VersionClearing widthLinkageTractor from
RS8 (8-way, fixed wings)150 / 190 / 210 / 240 cm, with wings 190 to 280 cmCat. 1/2 to Cat. 240 to 75 hp
RS12 (12-way, movable wings)250 to 360 cm closed, 280 to 400 cm openCat. 275 to 160 hp

Blade height 70 cm. Manufacturer’s data, subject to change.

Robust quality,
made in Europe.